ARTEC HT-CH Chorus + 4 Band Equalizer
€98.89
Out of stock
SKU
ARTEC HT-CH
ARTEC HT-CH, Professional 4 band equalizer with Chorus effect
The preamp HT-CH is a 4 band Equalizer (Bass, Middle, Treble and Presence) with Chorus effect onboard with "Depth" and "Rate" controllers. It enables you to create your guitar sounds sweeten and widen. Once you turn the Chorus switch on, you will experience a totally different acoustic atmosphere from any other equalizer system could provide. Rich, Sweet and Melrose sound... Control the "DEPTH" and "RATE" knobs together to establish an exquisite piece of guitar sounds for your performance.
Chorus effect is createc by the time delay device and frequency modulator. BBD (Bucket Brigade Device) can delay the signal and "Rate" & "DEPTH" knobs can modulate chorus effect. Using chorus effect could create the vibration effect as well as 12 string effect.
"Rate" knob is the speed controller that modulate the time delay.
"Depth" knob modulates the frequency width.
Powered by a 9V battery or 48V phantom.
The master volume control to adjust the sound level of the post-equalized piezo pickup.
The investment phase selector instantly reverses the phase 180 degrees, which cancels the existing feedback. This system helps to feel liberated when the feedback is playing with other sound systems.
The LED indicates operation of the phantom when a current of 48V applied to the unit.
The LED low battery indicator is checked 9V battery automatically without having to press any switch. It will be constantly lit when the battery provides less than 4V, indicating that should be replaced by a new one.
Includes:
Specifications:
Chorus effect is createc by the time delay device and frequency modulator. BBD (Bucket Brigade Device) can delay the signal and "Rate" & "DEPTH" knobs can modulate chorus effect. Using chorus effect could create the vibration effect as well as 12 string effect.
"Rate" knob is the speed controller that modulate the time delay.
"Depth" knob modulates the frequency width.
Powered by a 9V battery or 48V phantom.
The master volume control to adjust the sound level of the post-equalized piezo pickup.
The investment phase selector instantly reverses the phase 180 degrees, which cancels the existing feedback. This system helps to feel liberated when the feedback is playing with other sound systems.
The LED indicates operation of the phantom when a current of 48V applied to the unit.
The LED low battery indicator is checked 9V battery automatically without having to press any switch. It will be constantly lit when the battery provides less than 4V, indicating that should be replaced by a new one.
Includes:
- Phantom output module 48 V + 4 pin connector cable
- Connector type output jack
- Balanced XLR output connector
- Hook cable and screws
- NOT INCLUDED: battery, piezo pickup
Specifications:
- LED low battery indicator
- LED power indicator for Phantom
- Selector investment phase
- Nominal input level: ~ 20 dBV
- Frequency Response: 20 Hz - 20 kHz
- Input Impedance: 1 Mohms
- Output impedance: 1 Kohms
- Power supply: 9V alkaline battery or 48V phantom
- Battery life: over 300 hours
- Bass control ranege: ± 12 dB 80 kHz ~
- Middle control range: : ± 12 dB 800 Hz ~
- Treble control range: ± 12 dB 3 kHz
- Presence control range: ± 12 dB 15 kHz
- Low battery: check battery low 4.0 V
- Current Drain (w/ Chorus on): 1,8 mA
- Entrance: 2.5mm mono jack
- Jack unbalanced output: 1/4 "phone jack with switch power
- Jack Balanced output: XLR with power switch
- Built-in battery compartment
- Master volume
- Compatibility with guitars or low minimum width of 60 mm box
- Location in the upper side of the body (see diagram)
- Approximate Dimensions: 90 x 55 x 44 mm
Download the Cutting Template
Preamp Features | Effects, 4 Band EQ, Phase Switch, XLR Output, Upper Bout |
---|---|
Manufacturer | Artec |
Write Your Own Review